MYT SLIP TYPE ELEVATOR

YT SLIP TYPE ELEVATOR

YC SLIP TYPE ELEVATORS

HYC SLIP ELEVATOR

HYT SLIP ELEVATOR

MYC SLIP ELEVATORS

58-93R closed head tubing tong

RSX open head tubing tong

oilcountry 45000/55000/56000

M40 sucker rod hydraulic tong

Baash ross casing spider

DU slip

UC-3 casing slip

WOOLEY A drill collar slip

WOOLEY B drill pipe slip

C,CHDTUBING SPIDER part list

E tubing spider part list

 
 
 
Contact information

   

SE58 Closed head Tubing Tong is with variable torque, hydraulic lift, Pressure oil bath lubrication, hardened internal gears, roller chain final drive and two-speed operation. Because they are closed head, the power tong stay on the pipe all the way up. You save time because you donít have to remove and replace the tongs on the pipe after each joint is pulled. Every joint is gripped with a uniform, predetermined torque between 0.418.13kN.m (3006000 ft. lbs), which is controlled by setting the pressure relief valve. It is interchangeable with foster tubing tong. We are able to provide same Jaw and bushing parts.

Technical Parameter

a. Application Rang:   6089mm (23/8 5″ tubing

b. Maximum passing diameter:  127mm (5″)

c. Torque:  0.418.13kN.m (3006000 ft. lbs)

d. High Gear Rated Torque:  0.411.76kN.m (3001300 ft. lbs)

e. Low Gear Rated Torque:  8.13kN.m (6000 ft. lbs)

f. High Gear Rated Speed:  126r/min   Low Gear Rated Speed:  27r/min

g. Total Length1295mm (51″)      Thickness of Master Tong: 242mm (91/2″)    

High of Master Tong and Backup Tong:  425mm (163/4″)

h. Maximum dimension of glide elevator:  762mm (30″) 

i. Versa dint of the knot tail rope:  930kg (2056lbs)

j. Distance of between Tubing center and the knot tail rope:  762mm (30″)    

k. Weight   456kg (1000lbs)

l. Rated System Pressure:  13MPa (1880psi)

m. Maximum Oil Supply:  126L/min (33.5gpm)

SPARE PARTS FOR FOSTER 58-93R CLOSED HEAD HYDRAULIC TUBING TONG

93-26 three row chain

58-47 oil seal
wear bands

93-7 roller bearing

58-14  clutch shaft

819-1 anchor pin

819-5 split ring

819-13 adjust collar

819-9 pressure plate

58-20 ring gear and pinion

93-295 side plate

919-11 outer disc

819-10 inner disc

147-1 ring gear

50-48-1 inserts

77-90 hydraulic motor

58-240 hydraulic valve

93-3-3 transmission case or tong case

867-23 lever for valve

93-4 final drive gear

93-285drag ring sleeve

50-12low clutch gear

50-9high clutch gear

Office Address:  Sheng Li Oil Field, Dong Ying City, Shandong Province, CHINA
Phone: +0086-133-6120-8797   +0086-137-92059610
E-MAIL:  sales@shinequip.com    shinequip@126.com
SHINEQUIP INDUSTRY CO.,LTD Copyright2011