HYT slip type elevator

Slip type elevators are holding and hoisting tools for handling drill pipe, small casing and tubing in oil and gas field. They are especially fit to integral joint tubing, non-coupled casing, electric submersible pump and other tubular goods. They feature four slip designs which give an optimum contact on the pipe to prevent bottlenecking and gauge damage. The "YC" type elevator is capable of handling dual tubing strings. All type "Y" series elevator operate with the latch lock combination for safety. The "YC" provide a 7" insert contact to grip your casing or tubing. They are designed and manufactured according to APl Spec 8A/8C-specification for drilling and production Hoisting Equipment .

DESCRIPTION	# REQUIRED	WEIGHT EACH
HYT Elevator Complete (Less Slips) (150 Ton)	-	740 lbs.
3 1/2" x 3 1/2" HYT Slip Assembly	-	170 lbs.
3 1/2" x 2 7/8" HYT Slip Assembly	-	170 lbs.
2 7/8" x 2 7/8" HYT Slip Assembly	-	170 lbs.
2 7/8" x 2 3/8" HYT Slip Assembly	-	170 lbs.
3 1/2" HYT Slip Segments Only (Matched Set Of 4 pcs.)	-	150 lbs.
2 7/8" HYT Slip Segments Only (Matched Set Of 4 pcs.)	-	150 lbs.
Hinge Pin	1	12 lbs. - 8 oz.
Latch	1	22 lbs.
Latch Pin	1	6 lbs.
Latch Spring	1	12 oz.
Latch Lock	1	8 lbs.
Latch Lock Pin	1	13 oz.
Latch Lock Spring	1	12 oz.
Hinge Pin Retainer	1	2 oz.
Latch Pin Retainer	1	8 oz.
Grease Fitting	1	2 oz.
Link Block	2	5 lbs. - 8 oz.
Upper Link Block Bolt, Nut And Cotter	2	8 oz.
Link Block Bolt	2	8 oz.
Link Block Nut	2	3 oz.
Cotter Pin	2	2 oz.
Slip Bolt	4	1 lb.
Slip Spring	4	13 oz.
Guide Plate	1	8 lbs. - 10 oz.
Guide Plate Screw	2	2 oz.
Guide Plate Lock washer	2	2 oz.
Lock Wire	-	2 oz.
Hex Head Cap Screw	2	11 oz.
Lock Washer	4	2 oz.
Setting Ring Bushing	2	3 oz.
Hex Head Cap Screw	2	4 oz.
3 1/2" Insert Retainer Plate	4	4 oz.
2 7/8" Insert Retainer Plate	4	4 oz.
3 1/2" Setting Plate	1	11 lbs.
2 7/8" Setting Plate	1	11 lbs.
2 3/8" Setting Plate	1	13 lbs.